2010 Jeep Wrangler Oil Pressure Sensors
Refine by:
Shop Catalog
Showing 1 - 1 of 1 results
Sort by:
Part Number: 2561005
Guaranteed to Fit
$51.99
Vehicle Fitment
- 2010 Jeep Wrangler Unlimited X 6 Cyl 3.8L
- 2010 Jeep Wrangler Rubicon 6 Cyl 3.8L
- 2010 Jeep Wrangler Unlimited Rubicon 6 Cyl 3.8L
- 2010 Jeep Wrangler Unlimited Sport 6 Cyl 3.8L
- 2010 Jeep Wrangler Unlimited Sahara 6 Cyl 3.8L
- 2010 Jeep Wrangler Sahara 6 Cyl 3.8L
- 2010 Jeep Wrangler X 6 Cyl 3.8L
- 2010 Jeep Wrangler Sport 6 Cyl 3.8L
Product Details
Prop 65 Warning :
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Page 1 of 1 | Showing 1 - 1 of 1 results
Popular Products
Helpful Automotive Resources
What Does Check Gauges Mean?The check gauge light is usually triggered once the PCM detects something reading that’s outside normal parameters. These readings include:
Coolant TemperatureEngine RPMFuel LevelOil PressureTransmission temperatureTire PressureWheel SpeedVoltmeter
Common Triggers of the Check Gauges Light
The Oil Lubrication System: What It Is, How It Works, and More
Pro Tip:
In a five-quart crankcase engine, running it even one quart low can cause the engine oil to break down within 1500 miles.
P0524 Code: Engine Oil Pressure Too LowThe engine’s internal components need a protective layer of lubricant between them. Otherwise, the metal parts that come into direct contact with each other will wear out faster and produce heat.
The PCM transmits a voltage signal to the engine oil pressure sensor to use as a reference.
P0848 Code: Transmission Fluid Pressure Sensor/Switch “B” Circuit HighHydraulic fluid applies pressure inside the transmission. The transmission fluid pressure sensor converts that pressure into an electrical signal and sends it to the TCM or PCM.
P0840 Code: Transmission Fluid Pressure Sensor/Switch “A” CircuitThe transmission fluid pressure sensor sends a voltage signal to the PCM, informing the computer of the hydraulic pressure within the transmission. Using this information, the PCM or TCM will control output devices, such as the pressure control solenoid.
How to Check the Oil Pressure ManuallyIn an emergency, you can use street parking as a workspace to check your vehicle’s oil pressure, as long as the parking slot is flat enough. Before you try this, however, consult your city’s laws to determine if it’s legal to use street parking for car maintenance and repair jobs.
Clean