Ford F-150 Nerf Bars

How to Take Care of Your Ford F150 Nerf Bars

Ford pick-up trucks have exemplified decades of reliability, endurance, and performance. As developments continue to create trucks that cater to the American economy and lifestyle, the Ford F150 rises up to the calling. Ford's premier pick-up truck evolved to become one of America's top choices for utility and recreation. And as its size grows, the need for accessories like the Ford F150 nerf bar proved to be essential to make the equation work. As the trusty stepping board continues to provide you reliable service, you should repay it with equal tender loving care. Here are some tips on how to show your concern to your truck's nerf bar.

• Rinse the nerf bar with water every so often.

Considering the location of your nerf bar, it is one of those components that continue to take road dirt, debris, and mud whenever you travel. Whenever possible, you can direct a steady stream of clean water on the bar just to wash any particles that have sat there during your drive.

• Include it in your regular car wash and scrub off dirt and grime.

You should consider your Ford F150 nerf bar as an integral accessory to your truck. Having said that, you should treat it the way you treat other panels. Clean it as often as you can. Direct a steady stream of water to loosen the particles that are sticking on its surface. Once you have eliminated the initial layer of dirt, proceed with scrubbing the nerf bar with a sponge soaked in a car shampoo mixture. When there are still stubborn dirt left on hard to reach areas, use a brush also soaked in the car shampoo mixture then proceed with scrubbing these areas to rid of dirt.

• Hose down the nerf bar to rinse off the shampoo and dirt.

After scrubbing off the dirt and lathering the nerf with car shampoo, rinse it with clean water. This finally removes all residues from the nerf bar's surface.

• Wipe and dry with a clean cloth.

After washing your nerf bar, always remember to wipe and dry the panel. This eliminates possibilities of dirt sticking to the wet areas again and avoids the formation of rust.

American pick-up trucks are true symbols of workmanship, culture, lifestyle, and ingenuity. These trucks have evolved from slow four-cylinder parts movers to huge muscular beasts of burden. The big three American auto manufacturers continue to exemplify these traits with different models coming in different sizes, engines, and specifications. Ford remains competitive with its own line-up of trucks. Its flagship pick-up truck continues to be the Ford F150. As time progresses, this truck continues to inherit the trait of a true American workhorse. As it develops, accessories are also integrated into its design. The Ford F150 nerf bar has proven to be very beneficial especially to lifted trucks. Installing a set helps the driver and passengers get in the vehicle without too much hassle. But in order to enjoy its full benefit, you should know how to install it properly. Here are some tips for your installation.

Tip #1: Get the right nerf bar for your specific Ford 150.

The Ford F150 models ranges from different specifications, height, length, cab, and bed. Single cabs require shorter nerf bars, and they get longer with the extra cab than the full-size crew cab. Not being able to take note of these lengths will waste your time trying to reconfigure and return your bar in exchange for the right item. Delay in this aspect means longer waiting time before you can enjoy your truck with the nerf bar installed.

Tip #2: Best way to install the nerf bar is when your truck is placed on a car lift.

Since you will be working on with a component that is mounted under your truck, it is best to put your F150 on a car lift before you proceed with the installation. If you are able to lift it to the ideal working level, it would be easy for you to see the nuts, bolts, and holes where you will attach the bar.

Tip #3: Lay out the tools and components before installation.

It is best practice to lay out all the tools and components before beginning the installation. This way, you will be able to carefully note and identify which parts correspond to those being described in the manual. It also allows you an opportunity to do an inventory check to see if there are any missing parts.