GMC C2500 Suburban Parts & Accessories

The GMC C2500 Suburban has been lauded by consumers as the most reliable vehicle they owned. Its roomy interior can carry a load of cargo while still fitting several adult passengers comfortably. The SUV's performance is exceptional, driving it is easy despite its huge size. Lastly, it doesn't require expensive maintenance. All you need to do are basic tasks to care for your vehicle.

• Change the oil and filters regularly.

The most frequent maintenance you must do is to change the oil and its filter. These get dirty or contaminated because of accumulated moisture, which would cause them to function poorly and even cause engine failure if neglected. However, if you change them regularly, you can extend the life of your GMC C2500 Suburban. It is recommended that you do this every 5,000 miles, but if you want to do it a little less often than that, then use synthetic oil as it lasts longer.

• Take a look at your tires.

Your GMC C2500 Suburban's tires are what take you to your destination. If they are under-inflated or damaged, they would wear off quickly and cause you headaches in the future. Check your wheels' air pressure and don't forget to rotate them regularly and have them aligned. A simple check-up can make a real difference to your tires' lifespan and help improve your vehicle's fuel efficiency. Your SUV's wheels usually last for 60,000 miles, so make every mile count by keeping the tires well-maintained, properly inflated, and worn evenly.

• Don't forget preventive maintenance inspection.

Just because the GMC C2500 Suburban has been said to be low maintenance doesn't mean you don't have to check how it's doing anymore. By taking time to inspect as many parts of your SUV as you can, you can avoid possible component failure or discover faulty parts before they do any major damage. Preventive maintenance inspection includes visually inspecting the lights, checking for possible fluid leaks, and looking over the overall condition of your vehicle. While you're at it, you should also inspect the solvent, brake fluid, power steering fluid, transmission fluid, coolant, transfer case, and front and rear axles. If any of them are dirty or contaminated, flush them out immediately and replace with a fresh batch of fluid. It is also best to top them off as most component defects are caused by low fluid levels.

• Keep the components lubricated.

Another common reason for some components to fail is because of lack of lubrication. When they are no longer properly lubricated, these moving parts tend to damage each other as they function, which could cause them to wear out quickly, leading to an expensive repair or replacement. Lubricants do not cost much, so it is easy to always have one on hand when you need it. Do not be fooled by factory components sealed with "lubed for life" joints and rods. This usually means that once they are no longer lubricated, then you must replace them. Instead of doing that, apply grease on them regularly to extend their lifespan.